Custom Search

Friday, February 12, 2010

Chinese standards on stud shear connectors

GB/T 10433-2002
Cheese head studs for arc stud welding Read More......

Chinese standards on profiled steel sheets

GB/T 2518-2004
Continuous hot-dip zinc-coated steel sheets and strips

GB/T 12755-1991
Roll-profiled steel sheet for building Read More......

Chinese standards on welding consumables

GB/T 3429-2002
Wire rod for electrode

GB/T 5117-1995
Carbon steel covered electrodes

GB/T 5118-1995
Low alloy steel covered electrodes

GB/T 5293-1999
Carbon steel electrodes and fluxes for submerged arc welding

GB/T 8110-1995
Welding wires for gas shielding arc welding of carbon and low alloy steels

GB/T 10045-2001
Carbon steel flux cored electrodes for arc welding

GB/T 12470-2003
Low alloy steel electrodes and fluxes for submerged arc welding

GB/T 14957-1994
Steel wires for melt welding

GB/T 14981-2004
Dimensions, shape, mass and tolerances for hot-rolled wire rods

GB/T 17493-1998
Low alloy steel flux cored electrodes for arc welding Read More......

Chinese standards on bolting assemblies

General information
GB/T 3098.1-2000
Mechanical properties of fasteners – Bolts, screws and studs

GB/T 3098.2-2000
Mechanical properties of fasteners – Nuts – Coarse thread Materials

GB/T 699-1999
Quality carbon structural steels

GB/T 3077-1999
Alloy structure steels

GB/T 6478-2001
Steels for cold heading and cold extruding

Non-preloaded assemblies
GB/T 41-2000
Hexagon nuts – Product grade C

GB/T 95-2002
Plain washers – Product grade C

GB/T 5780-2000
Hexagon head bolts – Product grade C

GB/T 5781-2000
Hexagon head bolts – Full thread – Product grade C

GB/T 5782-2000
Hexagon head bolts

GB/T 5783-2000
Hexagon head bolts – Full thread

GB/T 6170-2000
Hexagon nuts, style 1

GB/T 6175-2000 Hexagon nuts, style 2

Preloaded assemblies
GB/T 1228-2006
High strength bolts with large hexagon head for steel structures

GB/T 1229-2006
High strength large hexagon nuts for steel structures

GB/T 1230-2006
High strength plain washers for steel structures

GB/T 1231-2006
Specifications of high strength bolts with large hexagon nuts, plain washers for
steel structures

GB/T 3632-1995
Sets of torshear type high strength bolt hexagon nut and plain washer for steel
structures

GB/T 3633-1995
Technical requirement for sets of torshear type high strength bolt hexagon nut
and plain washer for steel structures Read More......

Chinese standards on manufacturing tolerances

GB/T 706-1988
Hot-rolled beam steel – Dimensions, shape, weight and tolerances

GB/T 707-1988
Hot-rolled channel steel – Dimensions, shape, weight and tolerances

GB/T 709-2006
Dimension, shape, weight and tolerances for hot-rolled steel plates and sheets

GB/T 6728-2002
Cold formed steel hollow sections for general structure – Dimensions, shapes,
weight and permissible deviations

GB/T 9787-1988
Hot-rolled equal-leg angle steel – Dimensions, shape, weight and tolerances

GB/T 9946-1988 Dimensions, shape, weight and tolerances for hot-rolled L-sectional steel

GB/T 11263-2005
The hot-rolled H and cut T section

GBT 17395-1998
Dimensions, shapes, masses and tolerances of seamless steel tubes Read More......

Chinese standards on steel materials

GB/T 700-2006
Carbon structural steels

GB/T 912-1989
Hot-rolled plain carbon and low alloy structural steel sheets and strips

GB/T 1591-1994
High strength low alloy structural steels

GB/T 3274-1988
Carbon structural and low alloy steel rolled plates and strips

GB/T 4171-2000
Superior atmospheric corrosion resisting structural steel

GB/T 4172-2000
Atmospheric corrosion resisting steel for welded structures

GBT 5313-1985
Steel plate with through-thickness characteristics

GB/T 8162-1999
Seamless steel tubes for structural purposes

GB/T 13304-1991
Steels – Classification

GB/T 15574-1995
Steel products classification and definitions
YB 4104-2000 Steel plates for high rise building structure Read More......

Chinese standards on design of steel structures

GB 50017-2003
Code for design of steel structures

GB 50018-2002
Technical code of cold-formed thin-wall steel structures

JGJ 81-2002
Technical specification for welding of steel structure of building

JGJ 82-1991
Code for design, construction and acceptance of high strength bolt connection
of steel structures Read More......

Australian/New Zealand standards on shear stud connectors

AS/NZS 1554.2-2003
Structural steel welding – Stud welding Read More......

Australian/New Zealand standards on profiled steel sheets

AS 1397-2001
Steel sheet and strip – Hot-dipped zinc-coated or aluminium/zinc-coated Read More......

Australian/New Zealand standards on welding consumables

AS 1554.1-2004
Structural Steel Welding – Welding of steel structures

AS/NZS 4855-2007
Manual arc weld

AS/NZS 4857-2006
Manual arc weld high strength steel

AS/NZS 1167.2-1999
Welding and brazing – Filler metals

AS/NZS 2717.1-1996
Welding – Electrodes – Gas metal arc

AS 1858.1-2003
Electrodes and fluxes for submerged-arc welding – Carbon steels and carbonmanganese
steels

AS 1858.1-2003
Electrodes and fluxes for submerged-arc welding – Carbon steels and carbonmanganese
steels Read More......

Australian/New Zealand standards on bolting assemblies

AS 1112.3-2000
ISO metric hexagon nuts – Part 3: Product grade C

AS 1112.4-2000
ISO metric hexagon nuts – Part 4: Chamfered thin nuts. Product grades A and B

AS 4291.1-2000
Mechanical properties of fasteners made of carbon steel and alloy steel – Bolts,
screws and studs

AS/NZS 1252-1996
High strength steel bolts with associated nuts and washers for structural engineering

AS/NZS 1559-1997
Hot-dip galvanized steel bolts with associated nuts and washers for tower construction.

AS/NZS 4291.2-1995
Mechanical properties of fasteners – Nuts with specified proof load values – Coarse thread Read More......

Australian/New Zealand standards on manufacturing tolerances

AS/NZS 1365-1996
Tolerances for flat rolled steel products

AS 1548-1995
Steel plate for pressure equipment

AS/NZS 3679.1-1996
Structural steel – Part 1: Hot-rolled bars and sections Read More......

Australian/New Zealand standards on steel materials

AS 1163-2007
Structural steel hollow sections (cold-formed)

AS 1397-2001
Steel sheet and strip – Hot-dipped zinc-coated or aluminium/zinc-coated

AS 1548-1995
Steel plate for pressure equipment

AS/NZS 1594-2002
Hot-rolled steel flat products

AS/NZS 1595-1998
Cold-rolled, unalloyed, steel sheet and strip

AS/NZS 3678-1996
Structural steel – hot-rolled plates, floor plates and slabs

AS/NZS 3679.1-1996
Structural steel – Part 1: Hot-rolled bars and sections Read More......

Australian/New Zealand standards on design of steel structures

AS 4100-1998
Steel structures Read More......

Japanese standards on stud shear connectors

JIS B 1198:1995
Headed studs Read More......

Japanese standards on profiled steel sheets

JIS G 3302:2005
Hot-dip zinc coated steel sheets and coils

JIS G 3321:2005
Hot-dip 55 % aluminium-zinc alloy-coated steel sheets and coils Read More......

Japanese standards on welding consumables

JIS Z 3200:1995
Welding consumables – Technical delivery conditions for welding filler materials – Type of product, dimensions, tolerances and markings

JIS Z 3211:2000
Covered electrodes for mild steel

JIS Z 3212:2000
Covered electrodes for high tensile strength steel

JIS Z 3313:1999
Flux cored wires for gas shielded and self-shielded metal arc welding of mild steel, high strength steel and low temperature service steel
Read More......

Japanese standards on bolting assemblies

Non-preloaded assemblies
JIS B 1051:2000
Mechanical properties of fasteners made of carbon steel and alloy steel

JIS B 1052:1998
Mechanical properties of nuts

JIS B 1180:2004
Hexagon head bolts and hexagon head screws

JIS B 1181:2004
Hexagon nuts and hexagon thin nuts

JIS B 1256:1998
Plain washers Preloaded assemblies

JIS B 1186:1995
Sets of high strength hexagon bolt, hexagon nut and plain washers for friction
grip joints Read More......

Japanese standards on manufacturing tolerances

JIS G 3191:2002
Dimensions, mass and permissible variations of hot rolled steel bars in coil

JIS G 3192:2005
Dimensions, mass and permissible variations of hot rolled steel sections

JIS G 3193:2005
Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strip

JIS G 3194:1998
Dimensions, mass and permissible variations of hot rolled flat steel Read More......

Japanese standards on steel materials

JIS G 3101:2004
Rolled steels for general structure

JIS G 3106:2004
Rolled steels for welded structure

JIS G 3114:2004
Hot-rolled atmospheric corrosion resisting steels for welded structure

JIS G 3128:1999
High yield strength steel plates for welded structure

JIS G 3131:2005
Hot-rolled mild steel plates, sheets and strip

JIS G 3132:2005
Hot-rolled carbon steel strip for pipes and tubes

JIS G 3136:2005
Rolled steels for building structure

JIS G 3302:2005
Hot-dip zinc coated steel sheets and coils

JIS G 3312:2005
Prepainted hot-dip zinc-coated steel sheets and coils

JIS G 3321:2005
Hot-dip 55 % aluminium-zinc alloy-coated steel sheets and coils

JIS G 3322:2005
Prepainted hot-dip 55 % aluminium-zinc alloy-coated steel sheets and coils

JIS G 3350:2005
Light gauge sections for general structure

JIS G 3352:2003
Steel decks

JIS G 3444:2006
Carbon steel tubes for general structural purposes

JIS G 3466:2006
Carbon steel square pipes for general structural purposes

JIS G 3475:1996
Carbon steel tubes for building structure Read More......

Japanese standards on design of steel structures

JSCE: 1997
Design Code for Steel Structures – Part A: Structures in General

JSCE: 1997
Design Code for Steel Structures – Part B: Composite Structures Read More......

American standards on shear stud connectors

ASTM A 29–2005
Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for

AWS D 1.1–2004
Structural Welding Code – Steel Read More......

American standards on profiled steel sheets

ASTM A 606–2004
Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-
Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

ASTM A 653–2007
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process Read More......

American standards on welding consumables

AWS D1.3–1998
Structural welding code – Sheet steel

AWS A5.1–2004
Specifications for carbon steel electrodes for shielded metal arc-welding Read More......

American standards on bolting assemblies

Non-preloaded assemblies
ASTM A 193–2007
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for
High-Temperature Service

ASTM A 194–2007b
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High
Pressure or High Temperature Service, or Both

ASTM A 307–2007b
Standard Specification for Carbon Steel Bolts and Studs, 60 000 psi Tensile Strength

ASTM A 325–2007a
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

ASTM A 354–2007a
Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs,
and Other Externally Threaded Fasteners

ASTM A 449–2007b
Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat
Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

ASTM A 490–2006
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3,
for Structural Steel Joints [Metric]

ASTM A 563–2007a
Standard Specification for Carbon and Alloy Steel Nuts [Metric]

ASTM F 436–2007a
Standard Specification for Hardened Steel Washers Preloaded assemblies

ASTM A 193–2007
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for
High-Temperature Service

ASTM A 194–2007b
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High
Pressure or High Temperature Service, or Both

ASTM A 354–2007a
Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs,
and Other Externally Threaded Fasteners

ASTM A 563–2007a
Standard Specification for Carbon and Alloy Steel Nuts [Metric]

ASTM F 436–2007a
Standard Specification for Hardened Steel Washers

ASTM F 959–2007a
Standard Specification for Compressible-Washer-Type Direct Tension Indicators
for Use with Structural Fasteners [Metric]

ASTM F 1852–2007
Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/
Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength Read More......

American standards on manufacturing tolerances

ASTM A 6–2007
Standard Specification for General Requirements for Rolled Structural Steel
Bars, Plates, Shapes, and Sheet Piling

ASTM A 450–2007
Standard Specification for General Requirements for Carbon, Ferritic Alloy, and
Austenitic Alloy Steel Tubes

ASTM A 568–2007
Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength,
Low- Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

ASTM A 924–2007
Standard Specification for General Requirements for Steel Sheet, Metallic-
Coated by the Hot-Dip Process

ASTM A 999–2004 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe Read More......

American standards on steel materials

API 5L–2004
Specification for line pipe

ASTM A 36–2005
Standard Specification for Carbon Structural Steel

ASTM A 53–2007
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated,
Welded and Seamless

ASTM A 109–2003
Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

ASTM A 242–2004
Standard Specification for High-Strength Low-Alloy Structural Steel

ASTM A 268–2005a Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

ASTM A 283–2003(07)
Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

ASTM A 308–2006 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

ASTM A 333–2005
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature
Service

ASTM A 423–1995(04)
Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

ASTM A 500–2007
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel
Structural Tubing in Rounds and Shapes

ASTM A 501–2007
Standard Specification for Hot-Formed Welded and Seamless Carbon Steel
Structural Tubing

ASTM A 514–2005 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

ASTM A 529–2005
Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

ASTM A 572–2007 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium
Structural Steel

ASTM A 573–2005 Standard Specification for Structural Carbon Steel Plates of Improved Toughness

ASTM A 588–2005
Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi
[345 MPa] Minimum Yield Point to 4–in. [100–mm] Thick

ASTM A 595–2006
Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy,
Tapered for Structural Use

ASTM A 606–2004 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

ASTM A 618–2004
Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

ASTM A 653–2007
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process

ASTM A 673–2007 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

ASTM A 709–2007
Standard Specification for Structural Steel for Bridges

ASTM A 792–2006a
Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the
Hot-Dip Process

ASTM A 847–2005
Standard Specification for Cold-Formed Welded and Seamless High-Strength,
Low- Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
ASTM A 852–2003(07) Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick

ASTM A 871–2001
Standard Specification for High-Strength Low-Alloy Structural Steel Plate With
Atmospheric Corrosion Resistance

ASTM A 875–2006
Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the
Hot-Dip Process

ASTM A 913–2007
Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural
Quality, Produced by Quenching and Self-Tempering Process (QST)

ASTM A 945–2006 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

ASTM A 992–2006
Standard Specification for Structural Steel Shapes

ASTM A 1003–2005
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-
Coated for Cold-Formed Framing Members

ASTM A 1008–2007
Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength
Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

ASTM A 1011–2007
Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability Read More......

American standards on design of steel structures

AISC 305-2005
Code of Standard Practice for Steel Buildings and Bridges

ANSI/AISC 360-2005
Specification for Structural Steel Buildings Read More......

British/European standards on inspection documents

BS EN 10168:2004
Steel products — Inspection documents — List of information and description

BS EN 10204:2004
Metallic products — Types of inspection documents Read More......

British/European standards on material testing

BS EN 1597-1:1997
Welding consumables — Test methods — Part 1. Test piece for all-weld metal
test specimens in steel, nickel and nickel alloys

BS EN 10002-1:2001
Metallic materials — Tensile testing — Part 1: Method of test at ambient temperature

BS EN 10045-1:1990
Charpy impact test on metallic materials — Part 1: Test method (V-and U-notches)

BS EN 20898-2:1994
Mechanical properties of fasteners — Part 2: Nuts with specified proof load
values — Coarse thread

BS EN ISO 2566-1:1999
Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels

BS EN ISO 6506-1:2005
Metallic materials — Brinell hardness test — Part 1: Test method

BS EN ISO 6507-1:2005
Metallic materials — Vickers hardness test — Part 1: Test method BS EN ISO 6508-1:2005 Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)

BS EN ISO 14284:2002
Steel and iron — Sampling and preparation of samples for the determination of
chemical composition Read More......

British/European standards on stud shear connectors

BS EN ISO 13918:1998
Welding — Studs and ceramic ferrules for arc stud welding Read More......

British/European standards on profiled steel sheets

BS EN 10326:2004
Continuously hot-dip coated strip and sheet of structural steels — Technical
delivery conditions

BS EN 10143:2006
Continuously hot-dip coated steel sheet and strip — Tolerances on dimensions
and shape Read More......

British/European standards on welding consumables

BS EN 440:1995
Welding consumables — Wire electrodes and deposits for gas shielded metal
arc welding of non alloy and fine grain steels — Classification

BS EN 756:2004
Welding consumables — Solid wires, solid wire-flux and tubular cored electrodeflux
combinations for submerged arc welding of non alloy and fine grain steels
— Classification

BS EN 758:1997
Welding consumables — Tubular cored electrodes for metal arc welding with
and without a gas shield of non-alloy and fine grain steels — Classification

BS EN 1668:1997
Welding consumables — Rods, wires and deposits for tungsten inert gas welding
of non alloy and fine grain steels — Classification

BS EN ISO 2560:2005
Welding consumables — Covered electrodes for manual metal arc welding of
non-alloy and fine grain steels — Classification Read More......

British/European standards on bolting assemblies

BS EN 20898-2:1994
Mechanical properties of fasteners — Part 2: Nuts with specified proof load
values — Coarse thread

BS EN ISO 898-1:1999
Mechanical properties of fasteners made of carbon steel and alloy steel — Part
1: Bolts, screws and studs

BS EN ISO 16426:2002
Fasteners — Quality assurance system Non-preloaded assemblies

BS 4190:2001
ISO metric black hexagon bolts, screws and nuts — Specification

BS 4320:1968
Specification for metal washers for general engineering purposes metric series

BS 7419:1991
Specification for holding down bolts

BS EN ISO 4014:2001
Hexagon head bolts — Product grades A and B

BS EN ISO 4016:2001
Hexagon head bolts — Product grade C

BS EN ISO 4017:2001
Hexagon head screws — Product grades A and B

BS EN ISO 4018:2001
Hexagon head screws — Product grade C

BS EN ISO 4032:2001
Hexagon nuts, style 1 — Product grades A and B

BS EN ISO 4033:2001
Hexagon nuts, style 2 — Product grades A and B

BS EN ISO 4034:2001
Hexagon nuts — Product grade C

BS EN ISO 7091:2000
Plain washers — Normal series — Product Grade C Preloaded assemblies

BS 4395-1:1969
Specification for high strength friction grip bolts and associated nuts and
washers for structural engineering metric series — Part 1: General grade

BS 4395-2:1969
Specification for high strength friction grip bolts and associated nuts and
washers for structural engineering metric series — Part 2: Higher grade bolts
and nuts and general grade washers

BS 4604-1:1970
Specification for the use of high strength friction grip bolts in structural steelwork metric series — Part 1: General grade

BS 4604-2:1970
Specification for the use of high strength friction grip bolts in structural steelwork metric series — Part 2: Higher grade (parallel shank)

BS 7644-1:1993
Direct tension indicators — Part 1: Specification for compressible washers

BS 7644-2:1993
Direct tension indicators — Part 2: Specification for nut face and bolt face washers

BS EN 14399-1:2005
High-strength structural bolting assemblies for preloading — Part 1: General
requirements

BS EN 14399-2:2005
High-strength structural bolting assemblies for preloading — Part 2: Suitability
test for preloading

BS EN 14399-3:2005
High-strength structural bolting assemblies for preloading — Part 3: System HR
— Hexagon bolt and nut assemblies

BS EN 14399-4:2005
High-strength structural bolting assemblies for preloading — Part 4: System HV — Hexagon bolt and nut assemblies

BS EN 14399-5:2005
High-strength structural bolting assemblies for preloading — Part 5: Plain washers

BS EN 14399-6:2005
High-strength structural bolting assemblies for preloading — Part 6: Plain chamfered washers Read More......

British/European standards on manufacturing tolerances

BS EN 10024:1995
Hot rolled taper flange I sections — Tolerances on shape and dimensions

BS EN 10029:1991
Specification for tolerances on dimensions, shape and mass for hot rolled steel
plates 3 mm thick or above

BS EN 10034:1993
Structural steel I and H sections — Tolerances on shape and dimensions

BS EN 10051:1992
Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy
steels — Tolerances on dimensions and shape

BS EN 10055:1996
Hot rolled steel equal flange tees with radiused root and toes — Dimensions
and tolerances on shape and dimensions

BS EN 10056-2:1993
Specification for structural steel equal and unequal leg angles — Part 2:
Tolerances on shape and dimensions

BS EN 10210-2:2006
Hot finished structural hollow sections of non-alloy and fine grain steels — Part
2: Tolerances, dimensions and sectional properties

BS EN 10219-2:2006
Cold formed welded structural hollow sections of non-alloy and fine grain steels
— Part 2: Tolerances, dimensions and sectional properties

BS EN 10279:2000
Hot rolled steel channels — Tolerances on shape, dimension and mass Read More......

British/European standards on steel materials

BS 7668:2004
Weldable structural steels — Hot finished structural hollow sections in weather
resistant steels — Specification

BS EN 10020:2000
Definition and classification of grades of steel

BS EN 10021:1993
General technical delivery requirements for steel and iron products

BS EN 10025-1:2004
Hot rolled products of structural steels — Part 1: General technical delivery
conditions

BS EN 10025-2:2004
Hot rolled products of structural steels — Part 2: Technical delivery conditions
for non-alloy structural steels

BS EN 10025-3:2004
Hot rolled products of structural steels — Part 3: Technical delivery conditions
for normalized/normalized rolled weldable fine grain structural steels

BS EN 10025-4:2004
Hot rolled products of structural steels — Part 4: Technical delivery conditions
for thermomechanical rolled weldable fine grain structural steels


BS EN 10025-5:2004
Hot rolled products of structural steels — Part 5: Technical delivery conditions
for structural steels with improved atmospheric corrosion resistance

BS EN 10025-6:2004
Hot rolled products of structural steels — Part 6: Technical delivery conditions
for flat products of high yield strength structural steels in the quenched and
tempered condition

BS EN 10027-1:2005
Designation systems for steels — Part 1: Steel names

BS EN 10079:2007
Definition of steel products

BS EN 10149-1:1996
Specification for hot-rolled flat products made of high yield strength steels for
cold forming — Part 1: General delivery conditions

BS EN 10149-2:1996
Specification for hot-rolled flat products made of high yield strength steels
for cold forming — Part 2: Delivery conditions for thermomechanically rolled
steels

BS EN 10149-3:1996
Specification for hot-rolled flat products made of high yield strength steels for cold forming — Part 3. Delivery conditions for normalized or normalized rolled steels

BS EN 10164:2004
Steel products with improved deformation properties perpendicular to the surface of the product — Technical delivery conditions

BS EN 10210-1:2006
Hot finished structural hollow sections of non-alloy and fine grain steels — Part 
1: Technical delivery conditions

BS EN 10219-1:2006
Cold formed welded structural hollow sections of non-alloy and fine grain steels 
— Part 1: Technical delivery conditions

BS EN 10326:2004
Continuously hot-dip coated strip and sheet of structural steels — Technical delivery conditions
Read More......

British/European standards on design of steel structures

BS 5950-1:2000
Structural use of steelwork in building — Part 1: Code of practice for design 
— Rolled and welded sections

BS 5950-2:2001
Structural use of steelwork in building — Part 2: Specification for materials, 
fabrication and erection — Rolled and welded sections

BS 5950-3.1:1990
Structural use of steelwork in building — Part 3: Design in composite construction —
Section 3.1 Code of practice for design of simple and continuous composite beams

BS 5950-4:1994
Structural use of steelwork in building — Part 4: Code of practice for design of
composite slabs with profiled steel sheeting

BS 5950-5:1998
Structural use of steelwork in building — Part 5: Code of practice for design of
cold-formed thin gauge sections

BS 5950-6:1995
Structural use of steelwork in building — Part 6. Code of practice for design of
light gauge profiled steel sheeting

BS 5950-7:1992
Structural use of steelwork in building — Part 7: Specification for materials and
workmanship: cold formed sections

BS EN 1993-1-1:2005
Eurocode 3: Design of steel structures — Part 1-1: General rules and rules for
buildings

BS EN 1993-1-3:2006
Eurocode 3: Design of steel structures — Part 1-3: General rules — Supplementary
rules for cold-formed members and sheeting

BS EN 1993-1-8:2005
Eurocode 3: Design of steel structures — Part 1-8: Design of joints

BS EN 1993-1-12:2007
Eurocode 3: Design of steel structures — Part 1-12: Additional rules for the
extension of EN 1993 up to steel grades S 700
Read More......