Instrument Society Of America ( ISA )

Some of the standard below which frequently used the Instrument Engineer is:

• ISA S5.1 Instrument Symbol and Identification

• ISA S5.2 Binary Logic Diagram for Process Operation

• ISA S5.3 Graphic Symbol for DCS Logic and Computer System

• ISA S5.4 Instrument Loop Diagrams

• ISA S5.5 Graphic Symbol for Process Display

• ISA S7.0.01 Quality Standard for Instrument Air

• ISA S18.1 Annunciator Sequences and Specifications

• ISA S20 Specification Forms for Process Measurement and Control Instruments, Primary Elements and Control Valves

• ISA S71.01 Environmental conditions for process measurements and control systems: Temperature and Humidity

• ISA S71.04 Environmental conditions for process measurements and control systems: Airborne and contaminants

• ISA S75.03 Face to Face Dimensions for Flanged Globe Style Control Valves

• ISA S75.11 Control Valve Flow Characteristics and Rangeability

• ISA S84.01 Application of Safety Instrumented Systems for the Process Industries

• ISA RP 3.2 Flange Mounted Sharp Orifice Plates for Flow Measurement

• ISA RP 12.1 Electrical Instruments in Hazardous Atmospheres

• ISA RP 12.4 Instrument Purging for Reduction of Hazardous Area Classification

• ISA RP 12.6 Installation of Intrinsically Safe Instrument Systems in Class I Hazardous Locations

• ISA RP 12.11 Electrical Instruments in Hazardous Dust

• ISA RP 12.12 Electrical Equipment for Use in Class I, Division Hazardous (Classified) Locations

• ISA RP 31.1 Specification, Installation, and Calibration of Turbine Flowmeters

• ISA RP 60.6 Nameplates, Labels and Tags for Control Centres

• ISA RP 60.8 Electrical Guide for Control Centres

• ISA RP 60.9 Piping Guide for Control Centres

• ISA RP 551 Hardware testing of Digital Process Computer

• ISA RP 5517 Hardware Testing of Digital Process Computer Codes of Practice Testing Computer based System

Read More......

ASME Specifications 3

SA-226*
Covers electric-resistance-welded carbon steel boiler and superheater tubes for highpressure service. The tubing sizes and thicknesses usually furnished to this specification are ½ in. to 5 in. O.D. and 0.085 in. to 0.360 in. ,inclusive in minimum wall thickness.

SA-234**
Covers wrought carbon steel and alloy steel fittings of seamless and welded construction for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. The term ”fitting” applies to butt-welding, socket-end, and threaded end parts such as 45-deg and 90 deg elbows. 180-deg return bends, caps, tees,reducers, lap-joint stub ends, and other types as covered by the latest revision of ANSI B16.9, MSS SP48, and ANSI B16.11.

SA-249*

Covers welded tubes made from the austenitic steels with various grades intended for such use as boiler, superheater, heat exchanger, or condenser tubes. Grades TP 304H, TP 316H,TP 321 H,TP 347H, and TP 348H are modifications of grades TP 304, TP 316, TP 321., TP 347, and TP 348. and are intended for high-temperature Service such as for superheaters and reheaters. The tubing sizes and thickness usually furnished to this specification are 1/8 in. in inside diameter to 5 in. in outside diameter and 0.015 in. to 0.320 In., incl. in minimum wall thickness.

SA-250**
Covers several grades, designated T 1, T 1a. T lb. of electric-resistance-welded, carbon-molybdenum alloy-steel boiler and super heater tubes. The tubing sizes and thicknesses usually furnished to this specification are T/2 in. to 5 in. O.D. and 0.035 in. to 0.320 in., inclusive in minimum wall thickness.

SA-268**
Covers nine grades of stainless steel tubing for general corrosion-resisting and high-temperature service. These grades are commonly known as the “straightchromium” types and are characterized by being ferro-magnetic. Two of these grades, TP 410 and TP 329 (Table 1). are amenable to hardening by heat treatment, and the high- chromium. ferritic alloys are sensitive to notch-brittle ness on slow cooling to ordinary temperatures. These features should be recognized in the use of these materials. Grade 409 may be ordered with no final heat treatment provided the purchase order so specifies and the material meets all of the other requirements of the specifications.

SA-312**
Covers seamless and welded austenitic steel pipe intended for high-temperature and general corrosive service. Sixteen grades are covered. Grades TP 304H,TP 316H, TP 321H, TP 347H and TP 387H are modification of Grades TP 304, TP 316, TP 321, TP347 and TP 387, and are intended for hightemperature service.

SA-333**
Covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures, Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties

SA-334* Covers several grades of seamless and welded carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on lowtemperature impact properties.

*Identical with ASTM Specifications
**Identical with ASTM Specifications with revisions or additions

Independent Pipe and Supply Corp

Read More......

ASME Specifications 2

SA-155**
Covers electric-fusion-welded steel pipe suitable for high-pressure service and for use at high, intermediate, or lower temperatures, depending upon grade of material specified in outside diameters 16 in. and larger with wall thicknesses up to 3,000 in. incl.

SA-178*
Covers electric-resistance-welded tubes made of carbon steel and intended for use as boiler tubes, boiler flues, superheater flues, and safe ends. The tubing sizes and thicknesses usually furnished to this specification are ½ in. to 5. in. O.D. and 0.035 in. to 0.320 in. inclusive in minimum wall thickness. SA-179* Covers seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Covers tubes 1/8 to 3 in., incl. In outside diameter.

SA-181*
Covers forged or rolled steel pipe flanges, forged fittings and valves and parts for general service. Two grades or material are covered, designated as grades I and II, respectively, and are classified in accordance with their chemical and physical properties. 

SA-182* Covers forged or rolled alloy-steel pipe flanges, forged fittings and valves and parts intended for high-temperature service. The term “forgings” used in this specification shall be understood to cover one of all of the products mentioned above, either forged or rolled.

SA-192*
Covers seamless carbon steel boiler and superheater tubes for high-pressure service. The tubing sizes and thicknesses usually furnished to this specification are ½ in. to 7 in. O.D. and 0.085 in. to 1.000 in., inclusive in minimum wall thickness.

SA-199*
Covers several grades of chromiummolybdenum and chromium-molybdenum silicon seamless cold-drawn intermediate alloy steel tubes for heat exchangers, condensers, and similar heat transfer apparatus. The tubing Sizes usually furnished to this specification are 1/8 in. to 3 in. O.D. SA-209* Covers several grades of seamless carbonmolybdenum alloy-steel boiler and superheater tubes. Covers tubes ½ to 5 in., incl., in minimum wall thickness.

SA-210*
Covers seamless medium-carbon steel boiler tubes and boiler flues, including safe ends, arch and stay tubes, and superheater tubes. The tubing sizes and thicknesses usually furnished to this specification are ½ in. to 5 in. O.D. and 0.035 in. to 0.500 in.. inclusive in minimum wall thickness. SA-213* Covers seamless ferritic and austenitic steel boiler and superheater tubes and austenitic steel heat exchanger tubes, designated Grades T 5, TP 304, etc. These steels are listed in Tables I and II, respectively. Grades IP 304 H, TP 316 H. TP 321 H. TP 347 H, and IP 348 H are modifications of Grades TP 304, TP 316, TP 321. TP 347, and TP 348. and are intended for hightemperature service such as for superheaters and reheaters. The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. in inside diameter to 5 in. in outside diameter and 0.015 in. to 0.500 in., inclusive, in
minimum wall thickness.

SA-214*
Covers electric-resistance-welded carbon steel tubes to be used for heat exchangers, condensers, and similar heat-transfer apparatus. The tubing sizes usually furnished to this specification are to 3 in. O.D. inclusive.

*Identical with ASTM Specifications
**Identical with ASTM Specifications with revisions or
additions

Independent Pipe and Supply Corp

Read More......

ASME Specifications 1

SA-36*
Covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted. Or welded construction of bridges and buildings, and for general structural purposes. When the steel is used in welded construction, welding procedure shall be suitable for the steel and the intended service.

SA-53*
Covers seamless and welded black and hotdipped galvanized steel pipe in nominal sizes 1/8 in. to 26 in., incl. with nominal (average) wall thickness. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification.
1.2 Pipe may be furnished in the following types and grades;
1.2.1 Type F—Furnace-butt welded, continuous welded,
1.2.2 Type E—Electric-resistance welded, Grades A and B, and
1.2.3 Type S—Seamless, Grades A and B.
1.3 Pipe ordered under this specification is suitable for welding, and suitable for forming operatings involving coiling, bending and flanging, subject to the following qualifications;
1.3.1 Type F is not intended for flanging.
1.3.2 When Types S and E are required for close coiling or cold bending, Grade A should be specified. This provision is not intended to prohibit the cold bending of Grade B pipe.
1.3.3 When pipe is required for close coiling, this should be specified on the order.
1.3.4 Type E may be furnished either nonexpanded or cold expanded at the option of the manufacturer. When pipe is cold expanded, the amount of expansion shall not exceed 1.5% of the O.D. pipe size.

SA-105
Covers forged carbon steel piping components for ambient and highertemperature service in pressure systems. Included are flanges, fittings, valves and similar parts to specified dimensions or to dimensional standards such as those ANSI
and API specifications.


SA-106**
Covers seamless carbon steel pipe for hightemperature service in nominal sizes 1/8 in. to 26 in. inclusive. With nominal(average) wall thickness as given in ANSI B36.10. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of these specifications. Pipe ordered under this specification shall be suitable for bending, flanging and similar forming operations.

A-120
This specification covers black and hotdipped galvanized welded and seamless steel pipe in nominal sizes 1/8in. to 16 in. inclusive with nominal (average) wall thickness. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification . Pipe ordered under this specification is intended for ordinary uses in steam,water,gas, and air lines, but is not intended for close coiling or bending, or hightemperature service. No to this specification, except hydrostatic test which shall be made at the mills, as this specification is intended to cover pipe purchased mainly from jobber’s stocks.

SA-134**
Covers electric-fusion(arc)-welded straight seam or spiral seam steel plate pipe 16 in. and over in diameter (inside or outside as specified by purchaser), with wall thicknesses up to ¾ in.,inclusive. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of these specifications. The pipe is intended for conveying liquid, gas or vapor.

SA-135*
Covers two grades of electric-resistancewelded steel pipe in nominal sizes 2 in. to 30 in. inclusive with nominal(average) wall thickness up to 0.500 in. (12.70 mm), inclusive and in nominal sizes ¾ to 5 in. inclusive with nominal(average) wall thickness 0.083 in. (2.11 mm) to 0.134 in. (3.40mm) depending on size. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification. The pipe is intended for conveying liquid, gas or vapor: and only Grade A is adapted for flanging and bending.

*Identical with ASTM Specifications
**Identical with ASTM Specifications with revisions or
additions

Independent Pipe and Supply Corp

Read More......

The Piping Guide

The Piping Guide: For the Design and Drafting of Industrial Piping Sys

DIVP style=MARGIN: 0in 0in 0pt class=MsoNormalFrom development of the initial requirements to final drawings used in construction, this authoritative reference for the design and drafting of industrial piping systems provides a step-by-step guide to piping design. Created as an in-depth resource for professionals, this piping bible is as valuable in the field as it is in the office or the classroom. Among the topics covered in this encyclopedic survey are techniques of piping design, the assembly of piping from components, processes for connecting piping to equipment, office organization, methods to translate concepts into finished designs, and terms and abbreviations concerned. An expansive selection of charts and tables presents a wide array of information—frequently used data; factors for establishing pipeways width; spacing between pipes with and without flanges and for “jumpovers” and “runarounds;” principal dimensions and weights for key components; conversion for customary and metric units; direct-reading metric conversion tables for dimensions and data; and a metric supplement with principal dimensional data in millimeters—handily organized for quick reference./P/DIVDIVPart 1-Text/DIVDIVPiping:/DIVDIVUses, and Plant Construction/DIVDIVPipe, Fittings, Flanges, Reinforcements:/DIVDIVIn-Line Equipment and Support Equipment/DIVDIVValves, Pumps, Compressors, and Types of Process Equipment/DIVDIVOrganization of Work:/DIVDIVJob Responsibilities, Drawing-Office Equipment and Procedures/DIVDIVDrafting:/DIVDIVProcess and Piping Drawings Including Drawing Symbols, Showing Dimensions, Showing Instrumentation, and Bills of Material/DIVDIVDesign of Piping Systems:/DIVDIVIncluding Arrangement, Supporting, Insulation, Heating, Venting and Draining of Piping, Vessels and Equipment/DIVDIVStandards and Codes:/DIVDIVfor Piping Systems, Pipe, Pipe Supports, Flanges, Gaskets, Fitti@IE ¸Që…ÿ¾Úx

The Piping Guide: For the Design and Drafting of Industrial Piping Sys Read More......

ASTM Standards Used In Manufacturing

Telling™ Industries ASTM Reference Guide
This document is a quick reference to the ASTM Standards used in manufacturing Telling Industries products. For more information on ASTM International and to purchase various ASTM standards, please visit: www.astm.org

Light Gauge Drywall Steel
• *ASTM A653
• ASTM A1003
• ASTM C 645
• ASTM C754

Light Gauge Structural
• *ASTM A653
• ASTM A1003
• ASTM C955
• ASTM C1007

Drywall Channels and Accessories
• *ASTM A653
• ASTM A1003
• ASTM A924
• ASTM C645
• ASTM C754
• ASTM C1047

Shaftwall Framing
• *ASTM A653
• ASTM A1003
• ASTM A924
• ASTM E119
• ASTM E90

Area Separation Wall Framing
• *ASTM A653
• ASTM A1003
• ASTM C645
• ASTM E119

Structural Channels and Accessories
• *ASTM A653
• ASTM A1003
• ASTM A924
• ASTM C955
• ASTM C1007

*ASTM A653 has been overwhelming replaced with ASTM A1003 by
most if not all Framing manufactures in the US. ASTM A1003 is a more
stringent spec for purchasing of galvanized metals.
Telling™ BUILDSTRONG

Read More......

American standards on shear stud connectors

ASTM A 29–2005
Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for

AWS D 1.1–2004
Structural Welding Code – Steel Read More......

American standards on profiled steel sheets

ASTM A 606–2004
Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-
Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

ASTM A 653–2007
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process Read More......

American standards on welding consumables

AWS D1.3–1998
Structural welding code – Sheet steel

AWS A5.1–2004
Specifications for carbon steel electrodes for shielded metal arc-welding Read More......

American standards on bolting assemblies

Non-preloaded assemblies
ASTM A 193–2007
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for
High-Temperature Service

ASTM A 194–2007b
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High
Pressure or High Temperature Service, or Both

ASTM A 307–2007b
Standard Specification for Carbon Steel Bolts and Studs, 60 000 psi Tensile Strength

ASTM A 325–2007a
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

ASTM A 354–2007a
Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs,
and Other Externally Threaded Fasteners

ASTM A 449–2007b
Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat
Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

ASTM A 490–2006
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3,
for Structural Steel Joints [Metric]

ASTM A 563–2007a
Standard Specification for Carbon and Alloy Steel Nuts [Metric]

ASTM F 436–2007a
Standard Specification for Hardened Steel Washers Preloaded assemblies

ASTM A 193–2007
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for
High-Temperature Service

ASTM A 194–2007b
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High
Pressure or High Temperature Service, or Both

ASTM A 354–2007a
Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs,
and Other Externally Threaded Fasteners

ASTM A 563–2007a
Standard Specification for Carbon and Alloy Steel Nuts [Metric]

ASTM F 436–2007a
Standard Specification for Hardened Steel Washers

ASTM F 959–2007a
Standard Specification for Compressible-Washer-Type Direct Tension Indicators
for Use with Structural Fasteners [Metric]

ASTM F 1852–2007
Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/
Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength Read More......

American standards on manufacturing tolerances

ASTM A 6–2007
Standard Specification for General Requirements for Rolled Structural Steel
Bars, Plates, Shapes, and Sheet Piling

ASTM A 450–2007
Standard Specification for General Requirements for Carbon, Ferritic Alloy, and
Austenitic Alloy Steel Tubes

ASTM A 568–2007
Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength,
Low- Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

ASTM A 924–2007
Standard Specification for General Requirements for Steel Sheet, Metallic-
Coated by the Hot-Dip Process

ASTM A 999–2004 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe Read More......

American standards on steel materials

API 5L–2004
Specification for line pipe

ASTM A 36–2005
Standard Specification for Carbon Structural Steel

ASTM A 53–2007
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated,
Welded and Seamless

ASTM A 109–2003
Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

ASTM A 242–2004
Standard Specification for High-Strength Low-Alloy Structural Steel

ASTM A 268–2005a Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

ASTM A 283–2003(07)
Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

ASTM A 308–2006 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

ASTM A 333–2005
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature
Service

ASTM A 423–1995(04)
Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

ASTM A 500–2007
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel
Structural Tubing in Rounds and Shapes

ASTM A 501–2007
Standard Specification for Hot-Formed Welded and Seamless Carbon Steel
Structural Tubing

ASTM A 514–2005 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

ASTM A 529–2005
Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

ASTM A 572–2007 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium
Structural Steel

ASTM A 573–2005 Standard Specification for Structural Carbon Steel Plates of Improved Toughness

ASTM A 588–2005
Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi
[345 MPa] Minimum Yield Point to 4–in. [100–mm] Thick

ASTM A 595–2006
Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy,
Tapered for Structural Use

ASTM A 606–2004 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

ASTM A 618–2004
Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

ASTM A 653–2007
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process

ASTM A 673–2007 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

ASTM A 709–2007
Standard Specification for Structural Steel for Bridges

ASTM A 792–2006a
Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the
Hot-Dip Process

ASTM A 847–2005
Standard Specification for Cold-Formed Welded and Seamless High-Strength,
Low- Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
ASTM A 852–2003(07) Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick

ASTM A 871–2001
Standard Specification for High-Strength Low-Alloy Structural Steel Plate With
Atmospheric Corrosion Resistance

ASTM A 875–2006
Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the
Hot-Dip Process

ASTM A 913–2007
Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural
Quality, Produced by Quenching and Self-Tempering Process (QST)

ASTM A 945–2006 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

ASTM A 992–2006
Standard Specification for Structural Steel Shapes

ASTM A 1003–2005
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-
Coated for Cold-Formed Framing Members

ASTM A 1008–2007
Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength
Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

ASTM A 1011–2007
Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability Read More......

American standards on design of steel structures

AISC 305-2005
Code of Standard Practice for Steel Buildings and Bridges

ANSI/AISC 360-2005
Specification for Structural Steel Buildings Read More......